Browsed by
Category: rod brakes

an Earth Day ride and Eliza

an Earth Day ride and Eliza

To celebrate Earth Day today, Audrey and I went for a ride around the neighborhood. It was a gorgeous day, sunny with a cool breeze. The snow has mostly melted, and street cleaners have started to remove the winter debris from the roads in our neighborhood.
Audrey dressed in purples to match her bike.
We practiced signalling – Audrey is almost as good as me now – and also spent awhile practicing turns in the parking lot of her elementary school. She’s ready to have the training wheels pulled off her bike. Actually, she’s ready for a bigger bike. We’re going to see if we can get a bit more life out of this one by adjusting seat and handlebar height. Once she’s done we might cannibalize this bike to get the little blue Deelite working for when Dom outgrows his Tigger bike.
{Update: Audrey’s bike appears not to have adjustable handlebars or seat. Not impressed! So we’re going to prioritize getting the Eaton’s Glider frame fixed up for her ASAP, and her current bike will become a part donor for Dom’s Deelite and Damien’s Rapido. Vintage kids’ bikes FTW!}
I rode Eliza, the 1978 Raleigh DL-1 Lady’s Tourist that used to be Fiona’s.
Everything except the skirtguards and basket is original. 
I haven’t changed anything on her yet, so the seat is still a bit high for me.
Sturmey-Archer 3-speed hub marked 78 7 AW
The plastic trigger shifter has lost its adhesive label.
I think I’ll get it replaced with the chromed SA shifter with a screw-on faceplate that came with Bert.
Front rod brakes.
I didn’t remember to look for marks on the Westwood (rod-brake-only) rims.
The tires (or should I say tyres) are labelled Raleigh Roadster,
40-635 (28 x 1 1/2), 50 lbs/in2 – 3.5 ATM
Heron chainwheel, rear rod brake, pedals marked with the Raleigh crest.
Both the headbadge (hidden under the basket) and the decal on the rear mudguard are marked Nottingham.
Notice that the fenders have a rounded profile, instead of the ridged versions on Mary Poppins and Ms Trudy.
The Brooks B66, nicely broken in. I can see how a B66S might be more comfortable for me,
since the nose on the B66 feels a bit long.
Closeup of the OTT Simeli crocheted skirtguards.
Eliza still needs a thorough cleaning and some lemon-and-foil to really make her shine, and I might touch up her paint where it’s been dinged – her front forks are especially scratched. At the advice of uber-mechanic Keith, I’ll be considering an imported Dutch centre stand (the kind that attaches to the back wheel) to allow me to carry a grocery-loaded rack – this is crucial for me, since I need Eliza to earn her keep as my errand-running bike, and installation of any of the other double kickstands is made impossible by the rod brakes. (It is possible to install the specially-made DL-1 Pletscher prop stand, or to grind down a prop stand and install it with a shorter bolt, but those solutions aren’t stable enough if you plan to carry heavy loads.). If I’m not happy with how the brakes feel after new Fibrax rod brake pads have been installed, rebuilding the rear wheel with a 3-speed coaster hub (like Velouria did) will provide secret stopping powers. 
{Update: it seems that Steco make a black-powdercoated rear rack for 28-inch bicycles with an integrated swing kickstand, and this is what comes standard on the Achielle Oma – so now I know what I’m asking the guys at RedBike if they can special-order for me. Or am looking to bring back as a souvenir from Japan.}
As you can see behind me, in installing the (wave-style) bike racks at Audrey’s school in a sheltered location they managed to ensure they’ll be buried in a snowdrift after the rest of the snow is long gone. Oops.
Adventure, Discoveries…..cue RESEARCH!

Adventure, Discoveries…..cue RESEARCH!

Two Sundays ago a few of us (read: myself and Deborah and Audrey) ventured out to Edmonton Bicycle Commuters (EBC) to find some spare parts we were told existed NOT on eBay alone.

Sadly the part(s) we were searching for (namely rear fender reflectors for Nicki’s Winnie) were not in existence. All was not lost though!! There were some WONDERFUL finds in their stock piles outside (in the chilly snowy winter weather). Most of the bikes they have (either for sale or still needing mega work) are men’s styles or newer and sportier, which is fine, really, but its not what we’re about…so they were skipped over.

So it went, skipping over sporty bike after sporty bike…until we noticed this beauty:

 

Of course we have no dates or true history behind this bike, but we do know CCM Galaxie for a name (more than we had on Winnie) and I personally LOVE the curves here, most of the bikes I’ve seen only have our lovely loops on the bottom tube, this came as complete surprise! In the top picture you can also see the CCM Chainwheel (I thought I’d gotten a better picture inside the shop where we found one on it’s own in the parts buckets but sadly no) and while Winnie OUGHT to have one, I personally like the chainwheel she has now, it feels more… historic, or something.
That was exciting enough no? Finding a pretty loop frame with some vintage parts? Getting cute pictures? Oh but wait!! Deborah spotted THIS beauty buried in the snow pushed aside (and probably forgotten)

What you see here ladies and gents, is a (can I say rare? OOOh can I? Done!!) “rare” Eaton’s Glider… and this alone was incredibly exciting… until… wait for it… we realized that the distance between seat post and handle bars was small… perhaps this was a kids bike? We’re pretty sure she is, and as an added bonus, she has the chain guard in tact (with just a bit of rust, probably a clear coat protection would keep her pretty and vintage and covetable (as in I wish I was a kid so I could ride her). Check it out:

 
Considering she’s probably spent many a yucky day in the elements, I’d say she’s in decent if not good condition…and the colour!! SO gorgeous. Deborah & I think this is a bike we should restore together… we’ll let Audrey have it now and then when she finally out grows it I’ll force Liliana onto it (and I’m not even kidding!). Oh the accessories we could buy! (Oh the places you’ll go!)
These 2 bikes alone made my day. We were enamoured with the Eaton’s Glider, excited about the CCM Galaxie… and then… and then dear readers another WONDERFUL discovery by Deborah… and one that I couldn’t walk away from, no matter how hard I tried.
  
  
  
 

I’m not even gonna lie you guys, I am 100% in LOVE. The head badge alone had me sold and the absolutely divine curve on the bottom bar…WOW. She has rod brakes (which I’m still learning about, as in I just know they’re different and less reliable and possibly not as safe as caliper brakes? – correct me if I’m wrong, I’m going just one the bit of research I’ve done!). It looks like the rear brake would need to be completely re-done since there’s no rear wheel (something I’ll get to right away) though Deborah had an awesome suggestion of just going with a coaster brake for the rear, which will then make the rod brake less the only style I have (and since I’d ride in some wet conditions…it’d be a plus!).

And then we searched the wheel size, in the first picture you see it “requires 28″ wheels, and so we tried to price them out. Someone on eBay was selling a 28” wheel with a 3 speed hub …any guesses to how much it ended up going for? Yeah…almost $400 Canadian + shipping and handling. Needless to say I’m now less excited about trying to work on this Raleigh (even though I’m in love and want sooo badly) until I’ve done more research on rear wheels, and options I’ll have when it comes to replacement…

Some Pashley’s have 28″ wheels right? So maybe I’ll go to RedBike and see what they can do. Alternatively…is it possible to put a slightly different size wheel on? How much does that affect the bike? 28″ isn’t common but what if a 28 1/2″ is easier to find? Or do I need to go slightly smaller? Can I even find an appropriate size without totally breaking the bank? I want this bike SO much (I barely stop looking at the pictures!) but I cannot justify $400 or even close to that just for the rear wheel and hub…UGH!

Anyway, now that I’ve stopped complaining, enjoy our finds, covet along with us, and if you have suggestions or solutions we haven’t though of, PLEASE share!!